Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are hardend bolts, 10.9 instead of the stock 8.8.
These are hardend bolts, 10.9 instead of the stock 8.8. If you are using a 2600 lbs pressure plate we recomend using these heavy duty bolts. The torque on these bolts is 18 ftlbs, no more, no less.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Type 3: 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 111721349
Clutch Cable Adjusting Nut, Acorn nut Style, includes backing nut
Application:Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: N102401
This is a list of the most common bolts used on a car..
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 1141031
These clutch disc do not slip.
Application:Part #: 111141719F
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 311141031D
This disc transfers the power from the motor to the transmission.
Application:Part #: 113141723C
This spring returns the clutch arm.
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 1141033
Cushion Clutch Disc - 200mm
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:
These are hardend bolts, 10.9 instead of the stock 8.8.
