Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a full carpet kit.
This is a full carpet kit. The part numbers are just the basic numbers you will need to tell us; what color you want and what kind of material. There are three styles to choose from, Loop, Cut Pile, and Square Weave.
Color choices in Loop: Black, Brown, Salt and Pepper, Blue, Charcoal, Red, Saddle, Maroon, and Oatmeal.
Color choices in Cutpile: Black, Light Blue, Brown, Red, Saddle, Maroon, Grey, Royal Blue, Beige, and Silver.
Color choices in Square Weave: Oatmeal, Brown, Salt and Pepper, Black, and Red.
Prices can vary depending on style, color, and material.
All carpet kits for the Bug and Off-Road come with emergency brake and heater vent grommets sewn in. The deluxe kits for the Bug and Off-Road also include the shifter and heater control grommets. Brought to you proudly by TMI. Note: Buy a can of 3M spray adhesive. Pay attention when using this. Once it is stuck that's it.
Bug (Type 1): 56-57
No customer reviews for the moment.
Part #: T1501615
This is a great little tool for getting the rear axle nut off.
Application:Part #: N297012
Oil Drain Plug
Application:Part #: 113501835
Z-Bar Damping Ring, Operating Rod, Each
Application:Part #: 151837633A
Vent Wind Upper Pivot Screw, Convertible
Application:Part #: 111899123A
This is a little rubber pad that goes on the front beam where you attach the beam to the body.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 1800103
This is the "D", for Deutschland or Germany, plate of origin for that Euro look.
Application:Part #: 211609537K
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 141945177A
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111881404
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:Part #: 111971014
The electrical harness runs everything on the car. This is just the Main harness that goes front to rear. Does NOT have any of the front wires in it.
Application:Part #: 111405641A
These are the inner bearing seals on the drums or rotors.
Application:Part #: 311501191REP
Rear snubber repair stud
Application:Part #: 6801240A
Universal Billet Support Bracket, 1" clamps, measures 4 7/16"L x 3"H x 2 1/2"W
Application:
This is a full carpet kit.
