Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the high-temp/pressure hose used for routing oil to coolers and filters.
This is the high-temp/pressure hose used for routing oil to coolers and filters. It is sold by the foot.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1119031
Replacement fan
Application:Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
This is the high-temp/pressure hose used for routing oil to coolers and filters.
