Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the three pieces of tin that go on the back of the generator or alternator.
These are the three pieces of tin that go on the back of the generator or alternator. Install the flat backing plate on first with the hole down. Then place the small ring on top of that and then the last piece with the vent facing down. When you install the generator into the fan shroud, the wiring posts should be at 2 o'clock. For alternator or 30 amp 12v generators only.
No customer reviews for the moment.
Part #: 111255483
These are the vents that clip into the dash.
Application:Part #: 113881275C
Spring for Seat Back Locking Hook, Pair
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1117103ALF
# 8 Hose End 120 degree
Application:Part #: 111827513
Engine Lid Lock Latch
Application:Part #: 025101345B
Chamber to Cylinder Head Seal
Application:Part #: 111867191D
Passenger Side Roof Handle
Application:Part #: 221817793IV
Fresh Air Flap Control Knob, Ivory
Application:Part #: 113819447
This is the crescent shaped grill that goes behind the quarter windows.
Application:Part #: 1501615
Rear Brake Drum M14x1.5 Threads 5x130 and M12 Threads 5x4.75" dual pattern
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 151845521DAM
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 141853335
The front door window rolls up and down between these two rubber seals.
Application:Part #: 6721357A
Heim End for CNC Slave with 5/16" Ball
Application:
These are the three pieces of tin that go on the back of the generator or alternator.
