Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Lightened 12 lb.
Lightened 12 lb. flywheels are great for getting off the line faster or for faster acceleration. They're not good if you do a lot of freeway driving. When picking out a flywheel, you'll need to decide what you're going to be doing with the car. If you're not sure which flywheel you'll need, give us a call and we'll help you with your decision. We've had major problem with new Brazilian flywheels and feel the chromoly ones are much better. Do not run a lightened flywheel on a Bus. Flywheels come 8 doweled.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 111198475OS2
Main Bearing Set 1200-1600
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 111105297
It's really a bolt, but that's what everybody calls it.
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 111105401CO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1105257
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 111105713A
Rod Bearings .20
Application:
Lightened 12 lb.
