Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the bolts that hold the engine in.
These are the bolts that hold the engine in. There are two types, the half moon style and the hex head style. You can use the half moon style or the hex head on the starter side on all Bugs. The clutch arm side used a half moon style on Bugs up to 1970 and a regular hex head style on Bugs 1971 and on.
Bug (Type 1): 54-79
Bus (Type 2): 55-71
Type 3: 64-73
Ghia: 64-74
Thing: 73-74
Race/Off-Road: 54-79
No customer reviews for the moment.
Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 111955341A
Wiper Linkage Bushing Kit (Set of 4)
Application:Part #: 211703116
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 186360211
These ride on the tunnel from the shifter forward.
Application:Part #: 113845321CL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 1611750B
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 2805002BK
This mounts the tire onto the front of the bus getting it out of the interior.
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 151863705
This is a full carpet kit.
Application:Part #: 1701064
These pans will replace those rusted out parts of the front or rear floors.
Application:Part #: 2129034E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 112950508IDA
Auxiliary Venturi
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 161498041CAR
Forged HD King Pin Spindle Carriers ONLY
Application:Part #: 1601132CH
Lug Nut, 12 point, 12mm-1.5, Chrome set of 5
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:
These are the bolts that hold the engine in.