Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the rear handle that opens the engine lid. On the early cars (55-64) it's a T-style and held in by one large nut, on the later styles (65-71) it's held on by three Phillips screws, and on the 72-79 it's held on by one screw. This is a good way to keep people from messing around in your engine compartment.
Bug (Type 1): 55-64
No customer reviews for the moment.
Part #: 211707333
These brackets hold the bumpers on.
Application:Part #: 133857195
Dash Switch Cover Plate
Application:Part #: 113863703
This is a full carpet kit.
Application:Part #: 6501149108BO
Overboot Only for 930 CV, Each Offroad applications
Application:Part #: 211843368
Sliding Door Upper Rear Bushing
Application:Part #: 231069413
These rubber kits are for restoring your camper style windows..
Application:Part #: 211857641B
Also known as the "oh shit" handle.
Application:Part #: 113698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 1129199050
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.50
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 021115351A
This is the only thing that prevents dirt from running through the engine.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 6801140
Brake Line Tab, Pair
Application:Part #: 131611057
Front Wheel Cylinder, Standard beetle only. 22.20mm. Will not fit Super Beetle
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application: