Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
A stock sump plate that has been chromed..
A stock sump plate that has been chromed.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 111115111A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:
A stock sump plate that has been chromed..
