Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Deck Lid Rack Knock Down Style
Deck Lid Rack Knock Down Style
Bug (Type 1): Up to 1967
No customer reviews for the moment.
Part #: 211805189
Rear Hatch Prop Rod Buffer, Also Heater Lever rubber buffer
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 321971840
These are the rest of the little parts for the wiper shafts or wiper related parts..
Application:Part #: 261863010
These are the interior panels.
Application:Part #: 241853305
Window Aluminum Trim, Front Windshield, both halves
Application:Part #: 2847105ASS
New replacement pop out window frames in Stainless Steel
Application:Part #: 1101356
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1615101B
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 111857233A
Radio Block off Plate, without chrome strip and clips
Application:Part #: 211703622A
Jack Support, Front Right
Application:Part #: 113141723C
This spring returns the clutch arm.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 133853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: F1002
These are the glues and oils we use..
Application:
Deck Lid Rack Knock Down Style