Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:This is the vinyl covering for the inside roof and sides of the Ghia.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Ghia: 65-68
No customer reviews for the moment.
Part #: 211941531E
This switch turns on the headlights, as well as, dims the dash lights.
Application:Part #: 6711176A
Universal shift rod 59" long
Application:Part #: 6611793
Here are some fitting that might come in handy for your pedal assemblies or steering brakes for off road cars..
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: N177251
These are some of the fuses and bulbs that you might need.
Application:Part #: 67215569
These are heavy, heavy duty cables.
Application:Part #: 211837016F
Door lock mechanism right
Application:Part #: 111881364
This is the padding that sits on top of the springs of the seat.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 211611775B
This flex hose goes from the metal brake line on the rear fork to the metal brake line on the axle tube.
Application:Part #: 02086
These are the parts found in the distributor.
Application:Part #: 111945231
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 111813161
Engine Bay Shelf, Left
Application:Part #: 151845521ECL
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 113611055C
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application: