Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Heater Tube Insulating Cover, Pipe to Heater Box
Heater Tube Insulating Cover, Pipe to Heater Box
Bus (Type 2): mid 64-67
No customer reviews for the moment.
Part #: 311945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 1251014SS
Stainless Steel Phat Boy Muffler for Merged Exhaust
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 113898016
Door Handles and Ignition Switch matching 2 keys
Application:Part #: 1511221
Torsion Tube End Plates, Inner, Pair
Application:Part #: 2707291
This is a nice repro of the original front bumper step.
Application:Part #: 1823565
This guard goes underneath the front hood handle to prevent your fingernails from scratching the paint..
Application:Part #: 2847100SS
Safaris let those warm, palmy breezes blow through your bus.
Application:Part #: 111801043
Outer Rocker Panel Left
Application:Part #: 113857551LBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 261863012
These are the interior panels.
Application:Part #: 111863107GY
Rubber Firewall Mat, Gray
Application:Part #: 111129921
This is the barrel lock that locks the cable to the carb. It is also used on the Heater Cables
Application:Part #: 211867502
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 6711149
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:
Heater Tube Insulating Cover, Pipe to Heater Box
