Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
38mm SS intake Valves (each)
38mm SS intake Valves (each)
Race: All
No customer reviews for the moment.
Part #: 211259283
Accelerator Push rod to lever, Spring, each 2 Required
Application:Part #: 1601124CH
Aluminum Porsche Style Alloy Lug Nuts, Set of 5, M14-1.5 x 1 1/4" thread
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 111857514
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 113881633C
This knob and guide allows you to release the back of the front seat.
Application:Part #: 211817215
Headliner Grip Strip to Roofline Perimeter NON Fresh Air or Sunroof Applications, 3 Required per Bus
Application:Part #: 211703501B
Emergency Brake Cable Tube 1535mm
Application:Part #: 1109619
Dual Spring Shims, .030" 8 piece
Application:Part #: 251419831A
These are the boots for the rack and pinion units.
Application:Part #: 113867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1109410
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 211801371A
A floor support section.
Application:Part #: ECP11B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:
38mm SS intake Valves (each)