Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the ball joints on the tie rods.
These are the ball joints on the tie rods. To check the tie rod ends see: TIE RODS WITH ENDS. On some stock tie rods, the ends don't come off and you will need to replace the entire tie rod. We suggest you replace it with an adjustable one. We only carry adjustable tie rods.
No customer reviews for the moment.
Part #: 1601032
Fuchs Gloss Black with Polished Lip & Spokes, 5x130 bolt pattern 6"x15"
Application:Part #: 111809022BX
Lower Wheel House, Right
Application:Part #: 211703517
Clutch Cable Tube 1845mm
Application:Part #: N203501
Brake fluid hose.
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 1883404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 151863704
This is a full carpet kit.
Application:Part #: 211611505
These are the metal brake lines found throughout the car.
Application:Part #: 111857233
Radio Block Off Plate
Application:Part #: T1129025
This meter is used for synchronizing your dual carburetors.
Application:Part #: 68012024C
Set of 4 Chromoly Universal Mounting Tabs with 3/8" hole
Application:Part #: 111857209
Mesh Grill for Dash Speaker
Application:Part #: 113915305
Battery Mounting Strap
Application:Part #: 6415066
Rack and Pinion Unit, 2 mounting holes, 11 5/8", 36 Spline Shaft, 1.5 turns lock to lock
Application:Part #: 111945131B
Tail Light Lens
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:
These are the ball joints on the tie rods.
