Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the vinyl covering for the inside roof and sides of the Bug.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bug (Type 1): 64-67
Off-Road: 64-67
No customer reviews for the moment.
Part #: 141953166C
This seals the front turn signal housing from the fender.
Application:Part #: 151837625C
Vent wing seals on the front doors keep out the elements.
Application:Part #: 6615104A
Front Rotor for Disc brake setup, 5/205 bolt pattern, 12x1.5mm threads -1965
Application:Part #: 111405681
This plate goes between the two nuts on each of the front spindles.
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 211813356I
This is a repair panel for the rear corner.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 361827185A
Rear hatch Alignment Guide, attaches to body, 2 required
Application:Part #: 6501331H
Porsche Style 930 CV Joint 108mm OD, .875" Balls, CHINA
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: N111342
Some of the more common nuts you might need.. Transmission Mount Nut
Application:Part #: 113611764C
These are the metal brake lines found throughout the car.
Application:Part #: 133971020
The electrical harness runs everything on the car.
Application:Part #: 213707155A
Front Bumper Guard
Application:Part #: 211813227B
This is a repair panel for the area above the engine lid.
Application: