Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Fuel Pump Diaphragm 25-36 HP
FUEL PUMP DIAPHRAGM, 25-36 h.p., formulated with nitrile rubber to withstand modern gasoline blended with ethanol
Bug (Type 1): 25-36 HP
Bus (Type 2): 25-36 HP
Ghia: 25-36 HP
No customer reviews for the moment.
Part #: 025251147D
These are some of the pipes that connect the exhaust system to the muffler..
Application:Part #: 1105401CB
H-Beam Rods 5.500" Chevy Journal set of 4
Application:Part #: 311501325
Axle Bearing Cap Bolt (Set of 4)
Application:Part #: 161498041HD
Forged HD King Pin Spindle Kit
Application:Part #: 211415801D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 1401022
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: 1127025A
This electric pump replaces your stock pump.
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 1707135BBK
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 1101030
Included in this kit are the bolts, nuts and washers required for "out to head" assembly of the engine..
Application:Part #: 111405671
This nut holds the front drum on.
Application:Part #: 141831712A
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 261863111F
These are the interior panels.
Application:Part #: 251721555G
This cable operates the carburetor(s).
Application:Part #: 211609537K
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 028129087A
The heater hose goes from the fan shroud to the heater boxes.
Application:
Fuel Pump Diaphragm 25-36 HP