Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bug (Type 1): 64
No customer reviews for the moment.
Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 6601035BK
Bead Lock Ring, No Hardware, Matte Black
Application:Part #: JC44490
Jaycee Billet IDA Stacks, Polished, Each
Application:Part #: 113853235
These are the three pieces of chrome that run along the dash.
Application:Part #: 2847100CU
Safaris let those warm, palmy breezes blow through your bus.
Application:Part #: ECX25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 6823504
These fasteners take some time to put in, but they're worth the effort.
Application:Part #: 113885553
These are the stops that the back of the rear seat rests on.
Application:Part #: 1611701B
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 2101474
These bolt on valve covers are for the pancake style engine.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 311401301C
Lower Outer Needle Bearing For Front Beam (2 required)
Application:Part #: 6801119
90 Degree Gusset, .115" Thick, Set of 4
Application:Part #: 151867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 141881405
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 6711149
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.
