Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Whether your motor lives or not can depend upon this little shim.
Whether your motor lives or not can depend upon this little shim. Many people tend to overlook this part, but the shim controls the compression ratio. Compression equals heat and heat destroys motors. Take the time to figure your compression ratio and get the proper shims for that desired compression. Figuring compression ratios and getting the right shims is a long subject, so for help, just call or go to our tips and find the article I wrote on it. We find that 99.9% of all engines need barrel shims. Shims are sold in sets of 4.
No customer reviews for the moment.
Part #: 1101446
This is a shim that is used between the head and barrel.
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101371
40 HP Barrel Shims .010 (4)
Application:Part #: 1109602
Valve seats are used in the big valve heads.
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 111109623
25/36 HP Valve Springs (Set of 8)
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 1198090B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101394
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 1198159B
These rings are cast iron.
Application:
Whether your motor lives or not can depend upon this little shim.
