Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Tube Sleeve for 3/8" tube -6AN fitting (Pack of 2)
Tube Sleeve for 3/8" tube -6AN fitting (Pack of 2)
Race: All
No customer reviews for the moment.
Part #: 251721555G
This cable operates the carburetor(s).
Application:Part #: 110940115P
Pauter 1.5 Ratio Roller Rockers PR
Application:Part #: 6611300
Aluminum Buggy Master Cylinder Reservoir
Application:Part #: 113857611EWH
This is a strap, not a handle.
Application:Part #: 113407159B
Eccentric bolt
Application:Part #: 171881596C
These are the cables that release the back of the seats.
Application:Part #: T1401023
This is a great way to tow your car.
Application:Part #: 113501229D
CV joint bolt
Application:Part #: 1401301
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 221809102C
Complete Right Side Panel NO SHIPPING!!!
Application:Part #: 04030
These are the parts found in the distributor. Bosch no longer makes this rotor, we can get them but they are not Bosch
Application:Part #: 311823703A
This is the seal that goes around the rear deck lid.
Application:Part #: 1109615
Single Spring Shims, .015" 8 piece
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:
Tube Sleeve for 3/8" tube -6AN fitting (Pack of 2)
