Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement Float for Empi 40/44 HPMX or 40/44/48 IDF, each
Replacement Float for Empi 40/44 HPMX or 40/44/48 IDF, each
Race: All
No customer reviews for the moment.
Part #: 113823565A
This is the handle on the front hood.
Application:Part #: 112920236
36mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
Application:Part #: ECX25BL
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 211813356G
Rear Lower Corner, Right, 250mm (9.8") high
Application:Part #: 171867501
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 211703523
Heater Cable Tube 2775mm
Application:Part #: 6611795
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 6721550
This cable won't break that's for sure.
Application:Part #: 133698002
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 67215566
These are heavy, heavy duty cables.
Application:Part #: 043255106G
These are your source of heat.
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:
Replacement Float for Empi 40/44 HPMX or 40/44/48 IDF, each