Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Billet Bracket for 3/16" Brake Line, for 1 1/4" Tubing
Billet Bracket for 3/16" Brake Line, for 1 1/4" Tubing
Offroad/Race: All
No customer reviews for the moment.
Part #: 1109615
Single Spring Shims, .015" 8 piece
Application:Part #: 111401301
Front Axle Needle Bearing
Application:Part #: 221867504
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 151871957
These wires keep the top taught when the top is up.
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: 6711174
Aligns Type 1 Shift Shaft to Type 2 Transmission Coupler, Aluminum
Application:Part #: JC23230
Jaycee Fuel Pump Block off w/ AN 10 Fitting, Silver
Application:Part #: 141857073
These are the padded dashes that came on the 1968 and later Bugs.
Application:Part #: 111881365
This is the padding that sits on top of the springs of the seat.
Application:Part #: 6611780
Enables you do adjust front to rear brake bias with a twist of a knob.
Application:Part #: 1615109SWG
This kit allows you to run disc brakes in the rear.
Application:Part #: 113953041J
This is the whole unit, lens and bulb holder.
Application:
Billet Bracket for 3/16" Brake Line, for 1 1/4" Tubing
