Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:This is what gets smashed up first in an accident.
This is what gets smashed up first in an accident. For Buses and Bugs up to 1967, American style bumpers have tubing on the top that tie into the bumper guards. The 1967 and earlier Euro blades have no holes for tubing. Bumpers for Bugs 1968 and later are blade style only.
Bug (Type 1): -67
No customer reviews for the moment.
Part #: 111707199A
These round grommets go into the body for the over rider bracket..
Application:Part #: 113707191B
This special chrome bolt has a round head on it.
Application:Part #: 111707135A
These brackets hold the bumpers on.
Application:Part #: 113943901B
Front licence Plate clamps
Application:Part #: 111707121
These are the brackets that hold the bumpers on.
Application:Part #: 111707197A
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 113707155B
These are the guards on the front and rear bumpers.
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 1707199
When you take the front and rear bumper assemblies off to install Euro blade bumpers and guards, you're left with holes in the front and rear aprons.
Application:Part #: 113707233
This tubular bracket goes on American style bumpers to support the upper tubing of the bumper..
Application:Part #: 113707233WW
Bumper Support
Application:Part #: 113798054F
Stainless Steel Front Bumper Overrider Set
Application:Part #: 133807331A
Left rear bumper shock
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 113707191C
This special chrome bolt has a round head on it.
Application:Part #: 113707134A
These brackets hold the bumpers on.
Application:Part #: 113707904
This bracket holds the license plate to the car.
Application:Part #: 111707111
Front Bumper Bar, Bare Steel
Application:Part #: 113707155B
These are the guards on the front and rear bumpers.
Application:Part #: 113707311B
This is what gets smashed up first in an accident.
Application:Part #: 1707305
Chrome Tube Nerf Bar
Application:Part #: 113707156A
Chrome Bumper Guards without Impact Strip
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 113707103D
This is what gets smashed up first in an accident.
Application:Part #: 211827905
This bracket holds the license plate to the car.
Application:Part #: 113707391
This tubular bracket goes on American style bumpers to support the upper tubing of the bumper..
Application:Part #: 113798053A
This is what gets smashed up first in an accident.
Application:Part #: 133807346
these plastic caps mount on the ends of the later year bumpers..
Application: