Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
36mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
36mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
Race: All
No customer reviews for the moment.
Part #: N130101WG
Pan Head Screw for Bus 3 Gauge Pod
Application:Part #: 113129391
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 113945241A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 241853547
These are the clips that hold the various chrome moldings on.
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 141831401C
Karmann Ghia Left Upper Door Hinge
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 113501305
Inner Wheel Bearing Spacer
Application:Part #: 1601123
These are studs and nuts for different types of wheels.
Application:Part #: 1101354
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1837581
These window cranks and door handles are made of aluminum.
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 211609637A
Clamp for E-Brake to Backing Plate, Left
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 311251061F
This is the exhaust silencer.
Application:
36mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
