Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This disc transfers the power from the motor to the transmission. To check an old clutch disc, use a 7mm wrench and try to put the open end over the thickness of the disc. If the wrench goes on, you should think about replacing the disc. There are basically two types of discs, ridged and one with springs. The spring type has a little give before it engages, reducing the shock on the transmission. The ridged discs are good for dirt cars or someone who wants to race at the drag strip.
Bus (Type 2): Diesel Vanagon
No customer reviews for the moment.
Part #: N102401
This is a list of the most common bolts used on a car..
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 002141701
This shaft holds the throw-out bearing in place.
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 068141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 029141025B
The clutch cover is also known as a pressure plate.
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 002141701A
This shaft holds the throw-out bearing in place.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 311141031B
This disc transfers the power from the motor to the transmission.
Application:Part #: 1198026
This kit contains a quality brass bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 2141701C
This heavy duty arm is a good idea if you need a new clutch arm.
Application:
