Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the vinyl covering for the inside roof and sides of the Bus.
This is the vinyl covering for the inside roof and sides of the Bus. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 151845521BAM
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 04004
These are the parts found in the distributor.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 6601202
Aluminum Hub 5x205 for Combo Spindles
Application:Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 211919051A
The sending unit registers the fuel level on the gauge.
Application:Part #: 1601051
Fuchs Chrome, 5x130 bolt Pattern, 5.5"x15"
Application:Part #: 6119025CH
This screen attaches to the fan shroud keeping the big stuff out.
Application:Part #: 211817216
Headliner Grip Strip to Roofline Perimeter Fresh Air or Sunroof Applications, 6 Required per Bus
Application:Part #: 2251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 111971018
The electrical harness runs everything on the car. This is just the Main harness that goes front to rear. Does NOT have any of the front wires in it.
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 1611750A
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 133201179
Fuel Elbow, "T" to Filler Neck
Application:Part #: 113837639A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 113915305
Battery Mounting Strap
Application:
This is the vinyl covering for the inside roof and sides of the Bus.
