Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the inner bearing seals on the drums or rotors.
These are the inner bearing seals on the drums or rotors. They should be replaced every time you take the inner bearing out. Note: Just tap them in evenly with a hammer.
Bug (Type 1): 69-79
Type 3: 68-74
Ghia: 69-74
No customer reviews for the moment.
Part #: 131601156
Beauty rings fit under the hubcap to improve the look of your stock rim.
Application:Part #: N101191
12mm bolt for reduction boxes to spring plate. There are 4 bolts for each side. These are sold each.
Application:Part #: N203741
We only carry metric hose.
Application:Part #: 113611399
Brake Fluid Reservoir Pad
Application:Part #: 211837219E
Key Blank, (A,D,E,F,V,Z) Profile
Application:Part #: 211609701P
These cables set the rear brakes.
Application:Part #: 111837209B
This seal goes between the handle and the body.
Application:Part #: 6945201A
These lights work well on off road cars. With Amber Lens
Application:Part #: 1129720
Intake Gasket for CB's Competition Eliminator Cylinder Heads or super flow.
Application:Part #: 1129513
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 133415315
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
Application:Part #: 113609237A
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 1129139
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 111863001
Rubber Floor Mat Set, Black
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1800103
This is the "D", for Deutschland or Germany, plate of origin for that Euro look.
Application:
These are the inner bearing seals on the drums or rotors.