Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is what delivers gas and air to the engine.
This is what delivers gas and air to the engine. It would take a book to explain all of the symptoms of a bad carburetor. A simple check is to use a mirror and a flashlight to see if fuel is dripping onto the butterfly while the engine is idling. If it's dripping then there is a good chance it's bad. Another check is with the motor off, grab the throttle arm down where the butterfly shaft is and see if it moves back and forth. Again if it moves, the shaft is worn out and you should think about replacing it.
Bug (Type 1): 71-73
Bus (Type 2): 71
Ghia: 71-74
Thing: 73
Off-Road: 71
No customer reviews for the moment.
Part #: 1129506PRO
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair Inside Diameter is 3.850"
Application:Part #: 111198569A
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 1129405120
These are some of the most common jets used. Sold in pairs.
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 112950505IDF
Throttle Shaft Lock Tab Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113198575URP
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 112950508IDA
Auxiliary Venturi
Application:Part #: 1129804
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 211129493
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 111129405C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 112950502IDA
Stack Hold Down Screw and Washer
Application:Part #: 1129310
Empi Idle Jet Vent Tube Kit
Application:Part #: 1129517
Linkage Ball End Bushings, Pair
Application:Part #: 1129802
We've found that dual carbs work better than any single carburator set up.
Application: