Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Popout Window Glass
Popout Window Glass
Bug (Type 1): 1965-79
Offroad: 1965-79
No customer reviews for the moment.
Part #: 113847131BWH
This is the welt that goes around the rear popout windows.
Application:Part #: 113847131BBK
This is the welt that goes around the rear popout windows.
Application:Part #: 113847135A
These seals are for the side popout windows.
Application:Part #: 113847133A
These seals are for the side popout windows.
Application:Part #: 113847079C
Pop Out Window Latch, Left
Application:Part #: 113847080C
Pop Out window Latch, White, Right
Application:Part #: 133819663
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 111405647
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 141863701
This is a full carpet kit.
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 211843371A
Sliding Door Hinge Operating Cam
Application:Part #: 261863013
These are the interior panels.
Application:Part #: 1905250
This chrome clamp holds the distributor in time, as well as holding it onto the case.
Application:Part #: 111821306M
These are new rear fenders.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 6415061B
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 6798336
This kit comes with 2 E brake cable shortening kits, one throttle cable shortening kit and one clutch cable shortening kit.
Application:Part #: 211721335E
This cable pulls the arm that releases the clutch.
Application:Part #: 26010615
Empi Gasser, 5x112, 15x5.5"
Application:Part #: 6801211
These tabs are used for mounting just about anything to tubing..
Application:Part #: 211703631
This is where you would put in the stock jack to jack up the bus.
Application:
Popout Window Glass