Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These seals are for the side popout windows.
These seals are for the side popout windows. To replace the inner seal between the frame and the glass takes a lot of work. The frame will need to be split and the little screws that hold the frame together are usually rusted in. To replace the outer seal, start one edge of the seal and then work the other edge in with a small screwdriver.
Bug (Type 1): 65-77
Off-Road: 65-
No customer reviews for the moment.
Part #: 113837409A
Vent Window Division Bar, Left
Application:Part #: 151847345B
These scrapers found on convertibles are for the rear quarter windows.
Application:Part #: 111837501F
This is the mechanism that makes the window go up and down.
Application:Part #: 151837625
Vent wing seals on the front doors keep out the elements.
Application:Part #: 151845121CL
This seal goes around the front window.
Application:Part #: 111837629
This seal goes on the back side of the front door vent wing.
Application:Part #: 111837626B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 111837571B
Door Window Lift Channel fits both sides
Application:Part #: 151845521ECL
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 151847351B
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 113847139
This is the plate the cover goes over
Application:Part #: 151837497
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 113853322AGR
The front door window rolls up and down between these two rubber seals.
Application:Part #: 151837633B
Vent wing Upper Pivot Screw, Convertible Bug (Type 1): 73-79
Application:Part #: 111837507
This is the mechanism that makes the window go up and down.
Application:Part #: 151847341A
This seal goes between the rear quarter window and the front door side window on a convertible.This is very important if you want to keep your window in..
Application:
These seals are for the side popout windows.
