Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These covers look good but have a tendency to leak.
These covers look good but have a tendency to leak. We suggest using channel style or racing aluminum valve covers. To install see RACING ALUMINUM VALVE COVERS.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1198163A
These rings are cast iron.
Application:Part #: 043101457
These nuts and washers hold the heads on.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 043101421
Exhaust Valve Guide 9mm
Application:Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 1198092B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1107432
Not our favorite type of piston pin keeps.
Application:Part #: 1101371
40 HP Barrel Shims .010 (4)
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 111101401B02
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:
These covers look good but have a tendency to leak.