Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These reflectors came on the side of the 71-72 Bug tail light housings.
These reflectors came on the side of the 71-72 Bug tail light housings. They just clip into place.
Bug (Type 1): 71-72
No customer reviews for the moment.
Part #: 6823505
These fasteners take some time to put in, but they're worth the effort. Wing Nut
Application:Part #: 021256091T
These are your source of heat.
Application:Part #: 181405371WG
These are new ball joints pressed into reconditioned stock arms. You will need to send your cores before we will ship out your replacement set.
Application:Part #: N103483
This is a list of the most common bolts used on a car..
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 211405371AWG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: 2711098PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: T1001002
Scissor Jack works on Bugs, Buses, and Ghias. Great for lowered cars
Application:Part #: 211251053J
This is the exhaust silencer.
Application:Part #: 133863404
This is a full carpet kit.
Application:Part #: 111945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 151885372
This is the padding that sits on top of the springs of the seat.
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 131405319
Camber eccentric
Application:
These reflectors came on the side of the 71-72 Bug tail light housings.