Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.
The striker is what keeps the door closed, an absolute necessary part to say the least. They are held in place by large screws. We suggest you use an impact drive to get the striker out. Note: Use masking tape to mark two sides of the old striker, so you will know where to set the new one. Before you completely tighten down the new striker, close the door and see how it lines up. If it lines up, tighten the screws. If it doesn't, start making adjustments until it does.
Bug (Type 1): 67-79
Race/Off-Road: 67-79
No customer reviews for the moment.
Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 113201157
Fuel Breather "T"
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 141883402
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111898061
This kit comes with bolts and brakets to attach the floor pan to the body for one side.
Application:Part #: 113129620
This is a replacement paper element for the stock air cleaner..
Application:Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 211863160
These are the interior panels.
Application:Part #: 311012243
This is a slick tool for getting your hub caps off.
Application:Part #: N142331
Door Alignment Wedge Screw
Application:Part #: T1129026
This meter is used for synchronizing your dual carburetors.
Application:Part #: 211957801E
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 021109623K
These springs return the valves back to their seats.
Application:Part #: 1721508
This aluminum pedal is made to go over a roller pedal.
Application:Part #: 2117003
To use this cooler adapter, replace it for the spin-on oil filter and then hook up your remote oil cooler and filter connections..
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.