Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:New Ball Joint Spindles for 4x130 bolt pattern
New Ball Joint Spindles for 4x130 bolt pattern
Bug (Type 1): 69-
Ghia: 69-
Race: 69-
No customer reviews for the moment.
Part #: 113255355D
This is the hose that goes from the body to the engine.
Application:Part #: 113501811
Z-Bar Bushing, Equalizer Spring, each
Application:Part #: 211711629A
Heater Cable, OEM length 5735mm(225.79") Stretched
Application:Part #: 211809581A
This is the most common place for rust on your bus.
Application:Part #: 211415802F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 211867571WH
Headliner Pinch Welt (Beading), Off-white
Application:Part #: 211801391CE
Inner Rocker Panel, Left
Application:Part #: 151871917
The top staples to the rear bow.
Application:Part #: 111415543
Steering Column Upper Lock Plate
Application:Part #: 1129305040
These are some of the most common jets used. Sold in pairs. .60
Application:Part #: 211415701G
This rod goes between the steering box and the center pin.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 211845104B
These are cut from safety glass as required by law. This glass is the factory thickness. Sold each
Application: