Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable. There is no tube for the crank case breather, so we suggest you buy a breather filter as well.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1129600
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 113129651
This rubber hose goes from the oil breather to the stock air cleaner..
Application:Part #: 1129605
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1127101S
This is stainless steel braided fuel line.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 113127313
These stock pumps pump fuel into the carburetor.
Application:Part #: 111198553
Fuel pump rear for 40hp repair kit.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
Ghia: 40hp
Part #: 1129607EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 113127311
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
