Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the vinyl covering for the inside roof and sides of the Bus.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI. What you see here is just the price for the most common.
No customer reviews for the moment.
Part #: 311837657A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 6845111
Billet Aluminum Mirror mount, Each
Application:Part #: 115875563
Sunroof inner Clamp Plate
Application:Part #: 211843797A
Sliding Door Track Cover, Left
Application:Part #: 1615100ERC
Reconditioned King & Link Lowered Disc Brake kit 5x205 or 5x130
Application:Bug (Type 1); -65
KG; -65
Race: -65
Part #: 113881607A
This knob and guide allows you to release the back of the front seat.
Application:Part #: 111823345
Hood Stay Bolt (2 required) also used for hood hinge pivot bolt in various years (62-77 standard) (71-72 super)
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 021198075BCH
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 113251263
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 113845121ACL
This seal goes around the front window.
Application:Part #: 6501229BEL
CV Bolts for 930 CVs, 3/8"-24 Thread, 2 5/16" Long, Set of 6
Application:Part #: 111251261B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 01052
These are the parts found in the distributor.
Application: