Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Deluxe Zero Off-set 5x205 Rear Disc Brake Kit with E-Brake, 1973 and UP, Cast Brackets
Deluxe Zero Off-set 5x205 Rear Disc Brake Kit with E-Brake, 1973 and up, Cast Brackets
Bug (Type 1): 73-79
Type 3: 73
Ghia: 73-74
Thing: 73-74
Offroad/Race: 73-79
No customer reviews for the moment.
Part #: 1698152
This kit allows you to run disc brakes in the rear.
Application:Part #: 1615107
Replacement Rear Brake Bracket for Kit # 1615108
Application:Part #: 1698152P
Premium Replacement pads for your aftermarket Disc Brakes.
Application:Part #: 6615103E
Rear Rotor for Disc brake setup, 5/205 bolt pattern, 12x1.5mm threads
Application:Part #: 1615125A
Right Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 1615124A
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 1615106E
Replacement Rear Brake Rotor 5/205, 12x1.5mm, IRS for Kits 1615113, 1615110A, 1615114
Application:Part #: N0123191
Circlip IRS Rear inner Wheel Bearing Housing (1 per side) 2 per car
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 111821531ATN
Tan Running Board Material, Left
Application:Part #: 021127307A
This rod drives the fuel pump.
Application:Part #: 113845121BAM
This seal goes around the front window.
Application:Part #: 211863114
These are the interior panels.
Application:Part #: 1129614F
This fitting can be used when routing your breather hose into your air cleaner.
Application:Part #: 1127113B
Tube Sleeve for 3/8" tube -6AN fitting (Pack of 2)
Application:Part #: 311101353A
New single port head.
Application:Part #: 111953175
Bullet Bulb Holder Wiring Boot
Application:Part #: 111837501D
Window Regulator, Left
Application:Part #: 1255106FCC
HD Flanged 1 1/2" heater boxes to run with your performance Engine & Exhaust, Right
Application:Part #: 6707102
These bumpers are made for Baja Bugs.
Application:Part #: 6401233
These go from the front beam to the belly pan to strengthen the front beam area.
Application:Part #: N123291
Master Cylinder Pushrod Clip
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application: