Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Outside mirror, Convertibles only, Left
Outside mirror, Convertibles only, Left
Bug (Type 1): 1968-79
No customer reviews for the moment.
Part #: 113707155B
These are the guards on the front and rear bumpers.
Application:Part #: 211611781C
These are the metal brake lines found throughout the car.
Application:Part #: 221847105A
New replacement pop out window frames. Mild Steel
Application:Part #: 211829221A
Rear Hatch Striker Plate
Application:Part #: 211801052HL
This area tends to rust.
Application:Part #: 113847206
This is the little button that goes through the popout glass and to the latch..
Application:Part #: 211801581A
Engine Compartment Gusset, Inner, Left
Application:Part #: 186360411
These ride on the tunnel from the shifter forward.
Application:Part #: 211415049HWG
If you have a lot of play in the steering don't just assume the steering box is bad.
Application:Part #: 211251053J
This is the exhaust silencer.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 141943191
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 113945109
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:
Outside mirror, Convertibles only, Left