Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is one entire half of the pan.
This is one entire half of the pan. To put these in you should take the body off the pan. Drill out the old spot welds and cut the old halfs out and spot the new ones in. This requires welding.
Type 3: All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: 111837249BC
Door check rod complete.
Application:Part #: 2847104WH
This makes the rear window pop out like the front windows.
Application:Part #: 113721003
Pedal Assembly Bushing Kit
Application:Part #: 113837205D
These are the front door handles.
Application:Part #: 1117107ALM
No. 8 Gauge Adapter with 1/8 NPT
Application:Part #: 131721349
This adjustment nut goes on the end of the cable, back by the transmission.
Application:Part #: 111819190
Right hand Floor heater Vent Cover
Application:Part #: 6707102CH
These bumpers are made for Baja Bugs.
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 111199101
These are the bolts that hold the engine in.
Application:Part #: 1971102
These block are great for wiring.
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 039133241
These two boots connect the intake manifold with the end casting,
Application:Part #: 6501243
These spacers for the IRS stub axles are much stronger than the stock.
Application:Part #: 211843703P
Cargo Door Handle
Application:Part #: 1813110
This polished stainless steel firewall dresses up your engine compartment.
Application:
This is one entire half of the pan.