Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1101469
If you have high compression you will need to vent the valve covers into a breather box. Deluxe Vents have barbed end for the hose connection.
Application:Part #: 111867500
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: N102107
Decklid to Hinge Bolt for bugs
Application:Part #: N113102
Some of the more common nuts you might need..
Application:Part #: 151853111C
Door Panel Molding Set 6 pcs Convertible Only
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 211703133
Outrigger, Left Rear
Application:Part #: 111957357
Instrument Light Bulb Holder, Screw Connector
Application:Part #: 03019
These are the parts found in the distributor.
Application:Part #: 021119207
Cooling Fan Guard
Application:Part #: 6721562
Throttle Cable Extender for Morse and EMPI cables (10-32 thread) 8" cut to length
Application:Part #: 1405273RD
These snubbers last a lot longer than stock snubbers.
Application:Part #: 651300430
Suspension Limit Straps 30", Pair
Application:Part #: 211405681
This plate goes between the two nuts on each of the front spindles.
Application:
ECP part numbers are for the regular crimp style electrical ends.