Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on. Kits come with urethane bushings.
Bug (Type 1): All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: 111881373
This is the padding that sits on top of the springs of the seat.
Application:Part #: 14156631M
3 Hole to 5 Hole Steering Wheel Adapter, Metal and rubber. 1" tall
Application:Part #: 1800101
This is a "no frills", plain chrome license plate frame..
Application:Part #: 6501204
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
Application:Part #: 211119515
Front Engine Tin with Doghouse Cooler
Application:Part #: 6501205
20 1/4" Axles for Type 2 trans with 930 joints Pair
Application:Part #: 113611053B
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 113611701
This flex hose goes from the metal brake line to the front wheel cylinder.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 6401023
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: 151837626C
Vent wing seals on the front doors keep out the elements.
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: 141971118
The electrical harness runs everything on the car.
Application:Part #: 211711629B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 1898122
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: 6501229BE
These are hardened aircraft quality CV joint bolts.
Application:
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.