Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear "T" Piece to Hose Line
Rear "T" Piece to Hose Line
Bus (Type 2): 1968-79
No customer reviews for the moment.
Part #: 261809251A
B Post Outer Section Without Left Storage Compartment 550mm (21.65")
Application:Part #: 133415801
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application:Part #: 211711423
E-Brake Handle Escutcheon
Application:Part #: 151853355C
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: T1101211INT
This 1/2" drive tool takes off the oil filler.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 112950507IDF
Pump Jet Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 211945241R
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 1881401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 131141719HDL
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 141561410KT
Beautiful Classic Wood Thin Grip with Polished chrome Spokes With Hub
Application:Part #: N115317
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:
Rear "T" Piece to Hose Line