Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Front Turn Signals, Amber
Front Turn Signals, Amber
Bug (Type 1): 68-69
Offroad: 68-69
No customer reviews for the moment.
Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 151863123
These are the interior panels.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 6707302
These bumpers are made for Baja Bugs.
Application:Part #: 2883404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1847100HW
Hardware Kit (Bug Safari)
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 1B03010CL
These caps look cool and come in different colors, but that's the only good thing we can say about them.
Application:Part #: 113847139
This is the plate the cover goes over
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 211611070CCH
Front Right Wheel Cylinder (2 Required) CHINA
Application:Part #: 01006
These are the parts found in the distributor.
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 111819189
Left hand Floor heater Vent Cover
Application:
Front Turn Signals, Amber