Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are new lowered ball joints pressed into reconditioned arms. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 311405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
These are new lowered ball joints pressed into reconditioned arms. They are sold in sets of 4 on an exchange basis and come with the alignment eccentrics. Just pull your old arms off and install the new ones. Ball joints are hard to check, especially if they are marginal. To check your ball joints, grab the top of the tire and try to shake it. If the tire moves and you see movement in the ball joint, it's wasted and needs to be replaced.
Bug (Type 1): 66-
Ghia: 66-
Race/Off-Road: 66-
No customer reviews for the moment.
Part #: 133807105B
This is what gets smashed up first in an accident.
Application:Part #: 211837829
Front Door Sliding Window Fastener Seals, Includes seals for both latches
Application:Part #: 111411151
Grub Screw for Torsion Bar
Application:Part #: 153863014
These are the interior panels.
Application:Part #: 113853505FSL
Hood Molding
Application:Part #: 211801581B
Engine Compartment Gusset, Outer, Left
Application:Part #: 211817211
This is the flat seal for the air duct on buses 1955-1967.
Application:Part #: 241883405
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111941037CQ
This is the bucket that the bulb fits into.
Application:Part #: N120141
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 251953513
This switch tells the flasher which way to send the current.
Application:Part #: 1615109SWG
This kit allows you to run disc brakes in the rear.
Application:Part #: 1701061
These pans will replace those rusted out parts of the front or rear floors.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:
These are new lowered ball joints pressed into reconditioned arms. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 311405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.