Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Brake Servo
Brake Servo
No customer reviews for the moment.
Part #: 111951195A
These are boots that go around the wires that hook to the horn.
Application:Part #: 021109601A
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 113837606A
Vent Window Assembly, Right
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 1905530P
Pertronix Electric Ignition for 009 Distributor
Application:Part #: 113853505K
This is the front strip that goes down the front hood.
Application:Part #: N127071
Steering Wheel To Steering Shaft Retaining Key Bus (Type 2): -67
Application:Part #: 1863013CU
Custom door panels are a great way to customize the interior of your Bug.
Application:Part #: 211837016F
Door lock mechanism right
Application:Part #: 1115182
A stock sump plate that has been chromed..
Application:Part #: T1501332
If you plan to take off your CV joints you will need this socket.
Application:Part #: 3129034E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 1198026
This kit contains a quality brass bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 6821021N
These kits are really thick and have a great fitting hood.
Application:Part #: 113407361E
These joints are located in the ends of the control arms.
Application:Part #: 211801051HL
This area tends to rust.
Application:
Brake Servo
