Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are also known as the "forget-me-nots".
These are also known as the "forget-me-nots". When putting on your barrels, place the deflectors next to the barrels. Clip them into place before putting the heads on. If you "forget" them, take the heads back off and put them on. They are important for cooling, as they deflect air around the bottom of the barrels.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing (Type 5): 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119431CH
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:
These are also known as the "forget-me-nots".
