Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Apron, With Crank Hole for Starter Handle
Rear Apron, With Crank Hole for Starter Handle
Bus (Type 2): 3/55-59
No customer reviews for the moment.
Part #: 113881607A
This knob and guide allows you to release the back of the front seat.
Application:Part #: 6881410
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 1941001
H4 headlights are a lot brighter than the stock headlight and the bulb is removable from the lens.
Application:Part #: 111971111
The electrical harness runs everything on the car.
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: 620107208SS
Replacement Stainless Steel Fuel Tank Brackets 8" Diameter
Application:Part #: 113819717
Fresh Air Control Box Hose (Pair)
Application:Part #: 221847081C
These are the latches that hold the popout frame out.
Application:Part #: 1707102
Stainless Steel Front Bumper Overrider Set
Application:Part #: 2711101PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 211845501A
Rear Window Glass Deluxe
Application:Part #: 211831421
These pins are in the door hinges.
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 141853547B
These are the clips that hold the various chrome moldings on.
Application:Part #: 111863703
This is a full carpet kit.
Application:
Rear Apron, With Crank Hole for Starter Handle
