Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Engine Lid Lock Seal
Engine Lid Lock Seal
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 113611015BD
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 211841081G
Cargo Door Skin, Lower Front to Waistline
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 1601051
Fuchs Chrome, 5x130 bolt Pattern, 5.5"x15"
Application:Part #: 1129511
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: 2601029C7
BRM Wheel, Chrome, 5x112, 7x17"
Application:Part #: 111721507B
This is the pedal that works the throttle.
Application:Part #: 186360411
These ride on the tunnel from the shifter forward.
Application:Part #: 113609638
Bracket for Rear Emergency Brake Cable
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 62010718E9
End Fill 10x30" Polished Stainless Steel Gas Tank
Application:Part #: 111867191D
Passenger Side Roof Handle
Application:Part #: 143845211A
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 211813164
This is what the battery sits on.
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:
Engine Lid Lock Seal
