Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward. With thread pitch of 10x1.5
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 151871198A
This is the pad between the top material and the headliner.
Application:Part #: 113847080C
Pop Out window Latch, White, Right
Application:Part #: JC44510
Jaycee Shorty Billet IDA Stacks, Black, Each
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 211501149
The CV joint boot seals in the grease and seals out the dirt.
Application:Part #: 211817202
Front Roof Repair Section
Application:Part #: 211809254
B Post Repair Section, Inner, Right, 200mm (7.9") high
Application:Part #: 171881595A
These are the cables that release the back of the seats.
Application:Part #: 251721555G
This cable operates the carburetor(s).
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 171881596C
These are the cables that release the back of the seats.
Application:Part #: 361827705
This is the seal that goes around the rear deck lid.
Application:Part #: 311105101F10
These are used cranks with reground rod and main journals.
Application:Part #: 111707135A
These brackets hold the bumpers on.
Application:Part #: 111898061
This kit comes with bolts and brakets to attach the floor pan to the body for one side.
Application:Part #: 311405371C
These joints are located in the ends of the control arms.
Application:
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
