Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This screen fits in the sump around the pick up tube.
This screen fits in the sump around the pick up tube. It's more of a rock catcher than anything else. We recommend an external filter in conjunction with the screen. Used screens are fine as long as they are clean.
Bug (Type 1): 61-65
Bus (Type 2): 61-65
Ghia: 61-65
No customer reviews for the moment.
Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 311115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1129614F
This fitting can be used when routing your breather hose into your air cleaner.
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115111A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 1117101ALM
These fittings are used for the stainless steel hose.
Application:
This screen fits in the sump around the pick up tube.
