Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Empi Aluminun Pro Velocity Stacks, 3 1/2" H x 3 7/8" W on top, Pair for 48 IDA
Empi Aluminun Pro Velocity Stacks, 3 1/2" H x 3 7/8" W on top, Pair for 48 IDA
Race: All
No customer reviews for the moment.
Part #: 6801233
Billet Bracket for 3/16" Brake Line, for 1 1/2" Tubing
Application:Part #: 111945116
This seal goes between the tail light housing and the body of the car..
Application:Part #: 113867502
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 141857681A
Black Formed Plastic Dash Top Cover includes Adhesive (7" Vent)
Application:Part #: 1863620BS
Center Console Basket (Small)
Application:Part #: 311609632
Parking Brake Push Bar
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 6703021
Show bars are available in 4 point or 6 point style.
Application:Part #: 113255965
Vent Cover Securing Clips
Application:Part #: 117867501
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:Part #: 6115467B
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 651300430
Suspension Limit Straps 30", Pair
Application:Part #: 151837633A
Vent Wind Upper Pivot Screw, Convertible
Application:Part #: 211813163
This is what the battery sits on.
Application:Part #: 1411299
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:
Empi Aluminun Pro Velocity Stacks, 3 1/2" H x 3 7/8" W on top, Pair for 48 IDA
