Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Heavy Duty IRS Spring Plates
Heavy Duty IRS Spring Plates
Offroad/Race: 1968-71
No customer reviews for the moment.
Part #: 115875565
Front Header Bow Mount Screw
Application:Part #: 151701061N
Floor Plate, Left, Convertible only
Application:Part #: 211615107
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle. If you are ordering this without sending your core in first you will need to order the core as well. The core charge will be refunded when we get your core back and it is rebuildable.
Application:Part #: 111801045K
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 071256052
Heat Riser Elbow, Right
Application:Part #: 211971116
The electrical harness runs everything on the car.
Application:Part #: 143845321C
Pop-Out Quarter Window Seal, fits both sides (Each)
Application:Part #: 211611725
These are the metal brake lines found throughout the car.
Application:Part #: 113837581D
Window Crank
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 6401021
This kit extends the shock towers of your king and link pin front end, giving you more travel.
Application:Part #: 111845101H
These are cut from safety glass as required by law.
Application:Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 111941173A
Parking Light Bulb Holder
Application: